Accessories
accessories
Ornaments: Accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel pan head screw (size 10-32) /Asset/truckST1-jpg.jpg
Ornaments: Accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (size 1/4"-20NC) /Asset/truckST2-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTS1-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTA1-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTS2-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes enclosed stainless steel bearings and raceway /Asset/truckHDT1-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes enclosed stainless steel bearings and raceway /Asset/truckHDT2-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes stainless steel sealed lubricant ball bearing assemblies for ease of rotation, product life and strength /Asset/truckextraheavyduty-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC secured by 1 stainless steel pan head screw (size 10-32) /Asset/truckIH1-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC) /Asset/truckIHTVS-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes 26 stainless steel ball bearings on cast races for rotation /Asset/150series.jpg
Ornaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglass1series-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglass2series-jpg.jpg
Ornaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglassihseries-jpg.jpg
Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (not included).
Not supplied as standard with holes drilled for mounting. /Asset/verticalmountpulley-jpg.jpg
Rope cleat is not included. Recommended cleats are CL9, CL9/B, CL9/CP or CL9/SS. /Asset/cleatboxcylinderlock-jpg.jpg
These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied.
The winch is locked at any position by removing the handle which engages the brake system. /Asset/stainlesssteelwinch-jpg.jpg
ST-1 Series Cap Style Stationary Single Pulley Truck for External Halyard Poles
(5) Truck secured by 1 stainless steel set screw (size 1/4"-20NC)Ornaments: Accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel pan head screw (size 10-32) /Asset/truckST1-jpg.jpg
ST-32 Series Cap Style Stationary Double Pulley Truck for External Halyard Poles
(2) Truck secured by 3 stainless steel set screw (size 5/16"-18NC)Ornaments: Accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (size 1/4"-20NC) /Asset/truckST2-jpg.jpg
OT Series Cap Style Stationary Single Pulley Truck for External Halyard Poles
(8) /Asset/truckOT-jpg.jpg RTC-1 Series Cap Style Revolving Single Pulley Truck for External Halyard Poles
(3) /Asset/truckRTC1-jpg.jpg RTC-2 Series Cap Style Revolving Double Pulley Truck for External Halyard Poles
(3) /Asset/truckRTC2-jpg.jpg RTS-1 Series Threaded Revolving Single Pulley Truck for External Halyard Poles
Flagpole: For up to 3-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTS1-jpg.jpg
RTA-1 Series Threaded Revolving Single Pulley Truck for External Halyard Poles
Flagpole: For up to 3-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTA1-jpg.jpg
RTS-2 Series Threaded Revolving Double Pulley Truck for External Halyard Poles
Flagpole: For up to 3-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes self-lubricating ball bearing assemblies for ease of rotation, product life and strength /Asset/truckRTS2-jpg.jpg
HDT-1 Series Threaded Revolving Single Pulley Truck for External Halyard Poles
Flagpole: up to 5-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes enclosed stainless steel bearings and raceway /Asset/truckHDT1-jpg.jpg
HDT-2 Series Threaded Revolving Double Pulley Truck for External Halyard Poles
Flagpole: up to 5-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes enclosed stainless steel bearings and raceway /Asset/truckHDT2-jpg.jpg
Extra Heavy Duty Series Threaded Revolving Double Pulley Truck for External Halyard Poles
(2) Flagpole: For up to 12-3/4" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes stainless steel sealed lubricant ball bearing assemblies for ease of rotation, product life and strength /Asset/truckextraheavyduty-jpg.jpg
IH-1 Series Cap Style Stationary Single Pulley Truck for Rope Style Internal Halyard Poles
(2) Truck: secured by 3 stainless steel set screws (size 5/16"-18NC)Ornaments: accepts spindle threading of 1/2"-13NC secured by 1 stainless steel pan head screw (size 10-32) /Asset/truckIH1-jpg.jpg
IH-2 Series Threaded Revolving Single Pulley Truck for Cable Style Internal Halyard Poles
(4) /Asset/truckIH2-jpg.jpg IHT-VS Series Threaded Stationary Single Pulley Truck for Rope Style Internal Halyard Poles
Flagpole: For up to 3-1/2" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC) /Asset/truckIHTVS-jpg.jpg
150 Series Threaded Revolving Double Pulley Truck for External Halyard Poles
Flagpole: For up to 4" outside top diameter pole with female fitting installedOrnaments: accepts spindle threading of 1/2"-13NC. Secured by 1 stainless steel set screw (1/4"-20NC)
Movement: utilizes 26 stainless steel ball bearings on cast races for rotation /Asset/150series.jpg
Fiberglass-1 Series Slip Fit Stationary Single Pulley Truck for External Halyard Poles
Truck Stem: designed to slip into a 2" inside diameter pole topOrnaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglass1series-jpg.jpg
Fiberglass-2 Series Slip Fit Stationary Double Pulley Truck for External Halyard Poles
Truck Stem: designed to slip into a 3" inside diameter pole topOrnaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglass2series-jpg.jpg
Fiberglass-IH Series Slip Fit Stationary Single Pulley Truck for Internal Halyard Poles
Truck Stem: designed to slip into a 3" inside diameter pole topOrnaments: accepts spindle threading of 1/2"-13NC /Asset/truckfiberglassihseries-jpg.jpg
Pole Top Adapters
(9) These adapters are used when mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded top plug installed. /Asset/poletopadapter-jpg.jpg Flagpole Caps
(2) Cast aluminum construction designed to slip over the top of the flagpole and be secured with three 1/4"-20NC stainless steel set screws. /Asset/flagpolecap-jpg.jpg Pulley and Eyebolt Assemblies
(2) Includes Hex Nut, Washer & Lock Washer /Asset/pulleyeyeboltassemblydeluxe-jpg.jpg
Vertical Mount Pulley Assemblies
1-1/2" outside diameter cast nylon pulley on a 1/4" stainless steel axle.Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (not included).
Not supplied as standard with holes drilled for mounting. /Asset/verticalmountpulley-jpg.jpg
Threaded Top Plugs
Screws into top of pole with 1-1/4" NPT threading and allows for insertion of the ornament with either a 1/2"-13NC or 5/8"-11NC spindle threading. /Asset/threadedtopplug-jpg.jpg Standard Cast Aluminum Cleats
(2) Two 1/4"-20NC Stainless Steel Mounting Screws Included /Asset/cleatstandard-jpg.jpg Light Duty Cast Aluminum Cleats
(2) Two #10-5/8" Self-Tapping Flat Head Mounting Screws Included /Asset/cleatlightduty-jpg.jpg Heavy Duty Cast Aluminum Cleats
Two 3/8"-16NC Stainless Steel Slotted Flat Head Screws Included /Asset/cleatheavyduty-jpg.jpg
Cleat Cover Boxes
(2) Cast aluminum with stainless steel hinge pins. Design allows for easy installation utilizing the cleat holes to mount the cleat cover box.Rope cleat is not included. Recommended cleats are CL9, CL9/B, CL9/CP or CL9/SS. /Asset/cleatboxcylinderlock-jpg.jpg
M-Winches
(11) The maintenance-free M-Winch is gearless and self-locking at any point, eliminating the need for a separate brake. /Asset/mwinchsatin-jpg.jpg
Stainless Steel Winches
(3) These winches are available for use on flagpoles with a butt diameter of 6" or larger.These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied.
The winch is locked at any position by removing the handle which engages the brake system. /Asset/stainlesssteelwinch-jpg.jpg
Handles for Stainless Steel Winches
Designed to be used with any of the stainless steel winches. /Asset/stainlesssteelwinchhandle-jpg.jpg
Standard/Deluxe Flag Arrangements
(14) Constructed of 1/8" stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size(s) of flag(s) without having to change the entire cable assembly. /Asset/flagarrangementstandard-jpg.jpg Cable Assemblies
(26) Constructed of 1/8" and/or 3/16" stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect of unraveling due to the rotation of the truck assembly. These standard cable assemblies are designed for flagpoles with a winch installed at 4' above grade. /Asset/cableassembly-jpg.jpg Rope Retainer Rings
(11) Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. /Asset/roperetainerringblack-jpg.jpg Beaded Retainer Rings
(18) These beaded rings are constructed of either 1" or a combination of 1" & 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of each retainer ring is determined by measuring from the outside tip of each thimble (the quick link is not included in the measurement). /Asset/beadedretainerringblackcircle-jpg.jpg Standard Profile Aluminum Flash Collars with 0.060 Inch (in) Wall Thickness
(26) /Asset/collarblack-jpg.jpg High Profile 'Trumpet' Aluminum Flash Collars
(10) Trumpet collars are generally used with flagpoles where a shoe base is wielded to the bottom; however, these collars can be used on standard in-ground mounted flagpoles if a higher profile is desired. /Asset/collarhighsatin-jpg.jpg Standard Profile Split Aluminum Flash Collars with 0.60 Inch (in) Wall Thickness
(26) A split collar can be useful when replacing or adding a collar to an installed flagpole without removing the pole from the foundation sleeve. The collar is split in half and mounting tabs with screws are installed on the underside of the collar. /Asset/collarmountingtabs1-jpg.jpg 