Catalog

These beaded rings are constructed of either 1" or a combination of 1" & 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link. The length of each retainer ring is determined by measuring from the outside tip of each thimble (the quick link is not included in the measurement).

Constructed of 1/8" and/or 3/16" stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect of unraveling due to the rotation of the truck assembly. These standard cable assemblies are designed for flagpoles with a winch installed at 4' above grade.

Cast aluminum with stainless steel hinge pins. Design allows for easy installation utilizing the cleat holes to mount the cleat cover box.
Rope cleat is not included. Recommended cleats are CL9, CL9/B, CL9/CP or CL9/SS.

Cast aluminum construction designed to slip over the top of the flagpole and be secured with three 1/4"-20NC stainless steel set screws.

Designed to be used with any of the stainless steel winches.

The maintenance-free M-Winch is gearless and self-locking at any point, eliminating the need for a separate brake.

These adapters are used when mounting a truck that has a spindle threading of 1-1/4" NPT and the pole does not have a threaded top plug installed.

Includes Hex Nut, Washer & Lock Washer

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag.

These winches are available for use on flagpoles with a butt diameter of 6" or larger.
These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied.
The winch is locked at any position by removing the handle which engages the brake system.

Constructed of 1/8" stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size(s) of flag(s) without having to change the entire cable assembly.

Screws into top of pole with 1-1/4" NPT threading and allows for insertion of the ornament with either a 1/2"-13NC or 5/8"-11NC spindle threading.

1-1/2" outside diameter cast nylon pulley on a 1/4" stainless steel axle.
Attaches with two 1/4"-20NC stainless steel flat head screws or two stainless steel straps (not included).
Not supplied as standard with holes drilled for mounting.