Florida indoor flags are USA made, available in 3x5 ft. and 4x6 ft. nylon, and feature a pole sleeve with a slotted tab sewn inside the sleeve. The tab attaches to a brass screw a the top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. The flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). 3x5 ft. indoor flags are typically displayed on either 7 ft. or 8 ft. poles. 4x6 ft. indoor flags are typically displayed on 9 ft. poles.
Unit of Measure
Specifications
Brands |
N/A Embassy Flag |
Flag Height |
N/A 3 ft |
Flag Length |
N/A 5 ft |
Material |
N/A Nylon |
State |
N/A Florida |
Application |
N/A Indoor |
Shipping Dimensions and Weight
Shipping Length |
N/A 12.75 Inch |
Shipping Width |
N/A 9.25 Inch |
Shipping Height |
N/A 1.5 Inch |
Shipping Weight |
N/A 1.0 Pound |
Additional Information
Additional Information |
N/A The flag is described in these words: "The seal of the state, of diameter one half the hoist, in the center of a white ground. Red bars in width one fifth the hoist extending from each corner toward the center, to the outer rim of the seal." (ref. Florida Dept of State, Florida Heritage, State Symbols) The basic design of the Florida State Seal dates from Florida State Legislature instructions in 1868. The State Seal was revised in 1985. The revised Seal has a Seminole Indian woman rather than a Western Plains Indian, the steamboat is more accurate, and the cocoa palm has been changed to a sabal palm as the Florida Legislature prescribed in 1970. (ref; flheritage.com) |
