Embassy Flag, Wisconsin flag


WISCONSIN STATE FLAG
Wisconsin flags, desktop flags, flag lapel pins, flag patch, flag decal
Order all Wisconsin flag items from the pull down menu below or see Bulk Pricing.

Wisconsin State Flag
Order Menu

Wisconsin state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Wisconsin indoor flag
Wisconsin Indoor Flag
Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories

Wisconsin boat flag
Wisconsin boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Wisconsin desktop flag
Wisconsin Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Wisconsin state flag decal
Wisconsin state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Wisconsin state flag patch
Wisconsin state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Wisconsin flag lapel pin
Wisconsin styate flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Wisconsin friendship flag lapel pin
Wisconsin / USA friendship flag lapel pin
(crossed flag lapel pin)
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Wisconsin outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon Wisconsin state flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Wisconsin boat flags are nylon, 12”x18” size with 2 brass grommets.

Wisconsin indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Wisconsin desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Wisconsin stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Wisconsin classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1863, modified 1979 with the addition of the word "WISCONSIN" in white letters above the state coat of arms and the date that Wisconsin was admitted to the union, "1848" in white letters below the state coat of arms.

Wisconsin state coat of arms

The Wisconsin state flag is a blue field with the state coat of arms centered, with "1848" below the arms, and "WISCONSIN" above the arms.

State Coat of Arms: Finalized in 1881. The Coat of Arms contains symbols that represent the diversity, wealth and abundance of resources in Wisconsin. The center of the shield contains the United States shield with the motto E Pluribus Unum. Below the shield are a cornucopia (a symbol for the plenty of the state), bars of lead to represent Wisconsin's mineral wealth, and 13 stars which symbolize the thirteen original states. Above the shield is a badger,and a scroll with the word "FORWARD ".

Acquired by the United States after the American Revolution and the signing of the 1783 Treaty of Paris, Wisconsin was part of the original Northwest Territory (1788). Afterwards, it was part of the Indiana Territory (1800), Illinois Territory (1809), and Michigan Territory (1818) before being incorporated as the Wisconsin Territory in 1836. In 1848, Wisconsin was admitted to the Union as the 30th state.


About Embassy Flag
Embassy Flag copyright