Embassy Flag,  Tennessee flag


TENNESSEE STATE FLAG
Tennessee flags, desktop flags, flag lapel pins, flag patch, flag decal
Order all Tennessee flag items from the pull down menu below or see Bulk Pricing.

Tennessee State Flag
Order Menu

Tennessee state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Tennessee indoor flag
Tennessee Indoor Flag
Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
Tennessee boat flag
Tennessee boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Tennessee desktop flag
Tennessee Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Tennessee flag lapel pin
Tennessee state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Tennessee friendship flag lapel pin
Tennessee / USA friendship flag lapel pin
(crossed flag lapel pin)
Tennessee flag decal
Tennessee state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Tennessee state flag patches
Tennessee state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.

Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Tennessee outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon Tennessee flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Tennessee boat flags are nylon, 12”x18” size with 2 brass grommets.

Tennessee indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Tennessee desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Tennessee stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Tennessee state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1905. The flag features an emblem as follows: three white stars on a blue globe representing the grand divisions of the state: East, Middle and West. Tennessee is divided into three regions by the Tennessee River; West Tennessee, Middle Tennessee and East Tennessee. The stars are bound together in indissoluble unity by an unending white band. The flag field is red, and on the fly end is a vertical blue band separated from the red field by a white edging. The width of the white stripe is one-fifth that of the blue bar; and the combined width of stripe and bar is equal to one-eighth the width of the flag.

North Carolina ceded its western land, the Tennessee county, to the Federal Government in 1789. Congress designated the area as the Territory of the United States, South of the River Ohio. The "Southwest Territory" as it was also known, was incorporated in 1790 and existed until 1796, when Congress approved the admission of Tennessee as the sixteenth state of the Union in June of 1796. (ref; tn.gov, State History Timeline)


About Embassy Flag
Embassy Flag copyright