Embassy Flag, New Hampshire flag


NEW HAMPSHIRE STATE FLAG
New Hampshire flags, desktop flags, flag lapel pins, flag patch, flag decal
Order all New Hampshire flag items from the pull down menu below or see Bulk Pricing.

New Hampshire state flag
Order Menu

New Hampshire state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
New Hampshire indoor flag
New Hampshire Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
New Hampshire boat flag
New Hampshire boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
New Hampshire desktop flag
New Hampshire Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
New Hampshire flag lapel pin
New Hampshire state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
New Hampshire friendship flag lapel pin
New Hampshire / USA friendship flag lapel pin
(crossed flag lapel pin)
New Hampshire state flag decal
New Hampshire state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
New Hampshire state flag patch
New Hampshire state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
New Hampshire outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon New Hampshire flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

New Hampshire boat flags are nylon, 12”x18” size with 2 brass grommets.

New Hampshire indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

New Hampshire desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

New Hampshire stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

New Hampshire classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1909
New Hampshire was one of the thirteen original colonies to declare independence in 1776. It included the area that later became the state of Vermont in 1808. It was the first colony to adopt its own constitution, and the ninth state to ratify the National Constitution.

New Hampshire state flag seal

New Hampshire did not officially adopt a state flag until 1909. Prior to that, New Hampshire had numerous regimental flags to represent the state. The flag has only been changed once, in 1931 when the state's seal was modified. The state seal was first created in 1775, was revised in 1784 and again in 1931.

The body of the flag is national blue. The center of the flag has the state’s seal with the frigate Raleigh -- all surrounded by laurel leaves and nine stars, and encircling the field is the inscription, SEAL OF THE STATE OF NEW HAMPSHIRE. The Raleigh one of the first 13 warships sponsored by the Continental Congress for a new American navy. (ref; nh.gov, New Hampshire Almanac, State Flag, State Seal)


About Embassy Flag
Embassy Flag copyright