Embassy Flag,  Nevada flag


NEVADA STATE FLAG
Nevada flags, desktop flags, flag lapel pins, flag patch, flag decal
Order all Nevada flag items from the pull down menu below or see Bulk Pricing.

Nevada State Flag
Order Menu

Nevada state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Nevada indoor flag
Nevada Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
Nevada boat flag
Nevada boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Nevada desktop flag
Nevada Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Nevada flag lapel pin
Nevada state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Nevada friendship flag lapel pin
Nevada / USA friendship flag lapel pin
(crossed flag lapel pin)
Nevada state flag decal
Nevada state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Nevada state flag patch
Nevada state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Nevada outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon Nevada state flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Nevada boat flags are nylon, 12”x18” size with 2 brass grommets.

Nevada indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Nevada desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Nevada stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Nevada state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1991
The Territory of Nevada was separated from the Utah Territory and incorporated in 1861. Nevada was admitted to the Union as the 36th state in 1864. In both 1864 and 1867 additional land was transferred to the state from portions of the Utah and Arizona Territories.

Nevada has had four flags in its history. The Legislature adopted the design of the first flag in 1905, more than 40 years after Nevada entered the Union. Governor John Sparks and Colonel Henry Day of Carson City, a member of the Governor's staff, designed this flag. It had a blue background with the words "Nevada" in the center, "silver" at the top, and "gold" at the bottom. Thirty-six silver and gold stars represented that Nevada was the 36th state admitted to the Union.

In 1915, the State Legislature repealed the 1905 Flag Act and created a new official flag, which was much different from the original. Clara Crisler of Carson City designed the new flag. It had a blue background with the State seal in the center. The design featured 18 gold stars arranged around the word "Nevada," and 18 silver stars below the words "All for Our Country." Again, the 36 stars indicated that Nevada was the 36th state admitted to the Union. When Miss Crisler added an extra star for a total of 37, the meaning of the stars was lost. This flag now hangs in the Nevada State Museum located in Carson City.

Nevada state flag emblem

The Legislature adopted the design of Don Louis Shellback III for the third flag in 1929. The background color of the flag remained blue, but the flag's design changed dramatically. Two sprays of sagebrush crossed to form a wreath in the upper left portion of the flag. A five-pointed star appeared at the center of the wreath with "Nevada" spelled out between the points of the star. A scroll with the motto "Battle Born" signified that Nevada entered the Union during the Civil War.

The 1991 Legislature approved a bill, sponsored by Senator William J. Raggio, to alter the way that "Nevada" is depicted on the State flag. Since October 1, 1991, the name "Nevada" has been positioned underneath instead of interspersed between the points of the star. Verne R. Horton created the current design of the flag.


About Embassy Flag
Embassy Flag copyright