Embassy Flag, Kansas flag


KANSAS STATE FLAG
Kansas flags, desktop flags, flag lapel pins, flag patch, flag decal
Order all Kansas flag items from the pull down menu below or see Bulk Pricing.

Kansas State Flag
Order Menu

Kansas state flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Kansas indoor flag
Kansas Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
Kansas boat flag
Kansas boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Kansas desktop flag
Kansas Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Kansas flag lapel pin
Kansas state flag lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Kansas friendship flag lapel pin
Kansas / USA friendship flag lapel pin
(crossed flag lapel pin)
Kansas flag decal
Kansas state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Kansas flag patch
Kansas state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Kansas outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon Kansas flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor state flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Kansas boat flags are nylon, 12”x18” size with 2 brass grommets.

Kansas indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Kansas desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Kansas stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Kansas state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1927, modified 1961
The area that became Kansas was annexed to the U.S. with the Louisiana Purchase of 1803, although the southwestern portion was formerly Spanish and Mexican, then Republic of Texas territory annexed after the War with Mexico 1846-1848. The Kansas Territory was organized in 1854 by the U.S. Congress with the Kansas-Nebraska Act of 1854. The Act voided the Missouri Compromise of 1820, resulting in conflicts between free state, or slavery absolitionists and pro-slavery settlers. The territory extended west into current Colorado. Governance of the Territory was initially from Fort Leavenworth, then Fort Riley. The Kansas was admitted to the Union in Janaury, 1861 as the 34th state.

Kansas state flag emblem

A state banner was first adopted in 1925, the name of the state above the state seal centered on a blue field, the seal framed by a sunflower. The sunflower was modified in 1953.

The state flag was adopted in 1927, the state seal on a blue background with the sunflower state crest, including a heraldic emblem used by the US Army above the seal. The flag was first displayed at Fort Riley. The state name spelled in gold lettering was added under the seal in 1961. The seal contains a pastoral setting near Fort Riley, the Kansas river and and hills, 34 white stars and the state motto "Ad Astra Per Aspera" ("To the stars, with difficulties")



About Embassy Flag
Embassy Flag copyright