Embassy Flag,  Connecticut flag


CONNECTICUT STATE FLAG
Connecticut flags, Connecticut flag lapel pins, Connecticut flag patch, Connecticut flag decal
Order all Connecticut flag items from the pull down menu below or see Bulk Pricing.
Connecticut State Flag
Order Menu

Connecticut State flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Connecticut indoor flag
Connecticut Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
Connecticut boat flag
Connecticut boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Connecticut desktop flag
Connecticut Desktop Flag

4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Connecticut flag lapel pin
Connecticut state flag lapel pin

Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Connecticut / USA friendship flag lapel pin
Connecticut / USA friendship flag lapel pin

(crossed flag lapel pin)
Connecticut flag decal
Connecticut state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Connecticut state flag patches
Connecticut state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

PRODUCT DESCRIPTIONS
Connecticut outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft.

Extra large outdoor nylon Connecticut flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor Connecticut flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Connecticut boat flags are nylon, 12”x18” size with 2 brass grommets.

Connecticut indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Connecticut desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Connecticut stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Connecticut classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Connecticut Statehood 1788; one of the original 13 colonies, 5th to become a state.
Year Flag Adopted: 1897

Inspired by a memorial from the Anna Warner Bailey Chapter of the daughters of the American Revolution, Governor O. Vincent Coffin, on May 29, 1895, introduced to the General Assembly the first proposal for the adoption of a State Flag. On that same day the Assembly passed a resolution appointing a special committee to prepare a designation of the flag already generally accepted as the official flag of the state.

The General Assembly of 1897 provided an official description of the flag ....of azure blue silk, with the armorial bearings in argent white silk with the design in natural colors and border of the shield embroidered in gold and silver. (ref. ct.gov – The State Flag)

Connecticut Arms of the State

The shield is the State Coat of Arms / Armorial Bearings

The official description of the Arms calls for: A shield of rococo design of white field, having in the center three grape vines, supported and bearing fruit.

Below the shield shall be a white streamer, cleft at each end, bordered with two fine lines, and upon the streamer shall be in solid letters of medium bold Gothic the motto: "QUI TRANSTULIT SUSTINET" (He Who Transplanted Still Sustains). (ref; ct.gov, The Armorial Bearings)


About Embassy Flag
Embassy Flag copyright