Embassy Flag,  Arizona flag


ARIZONA STATE FLAG
Arizona flags, desktop flags, flag lapel pins, flag patches, and flag decals
Order all Arizona flag items from the pull down menu below or see Bulk Pricing.
Arizona State Flag
Order Menu

Arizona State flags are USA made.
200 denier nylon and 2-ply woven polyester (Tough-tex or Poly-Max)
Outdoor flags are finished with heading and brass grommets up to 6x10 ft, rope heading & metal thimble ends on sizes 8x12 ft and larger.
Arizona indoor flag
Arizona Indoor Flag

Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories
Arizona boat flag
Arizona boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.
Arizona desktop flag
Arizona Desktop Flag
4"x6" soft nylon miniature flag mounted on a 10" black staff
with golden spear point
Arizona flag lapel pin
Arizona state flag lapel pin

Etched & Die Struck Enamel flag lapel pins on brass
3/4" to 1" (19 to 24 mm)
Arizona / USA friendship flag lapel pin
Arizona / USA friendship flag lapel pin

(crossed flag lapel pin)
Arizona flag decal
Arizona state flag decal
3.25" x 5" on vinyl stock w/ UV blocking inks.
Non-permanent adhesive - waterproof
.
Arizona state flag patches
Arizona state flag patch
100% embroidered including trim, 2 1/4" x 3 1/2"
Washable, sew-on, iron-on.
Desktop flag stands
Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood
Arizona shaped flag patch
Arizona state shaped patch
100% embroidered including trim
, 3¼"x3½"
Washable, sew-on, iron-on

PRODUCT DESCRIPTIONS
Arizona outdoor state flags
are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor state flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft and 6x10 ft.

Extra large outdoor nylon Arizona flags are offered in 8x12 ft, 10x15 ft and 12x18 ft. Production process includes a #10 white nylon rope is sewn into the 2” cotton polyester blend header. Galvanized metal thimble ends are crimped to the rope ends for attachment to the flag snaps. An additional brass grommet is placed midway on the heading for use with a third flag snap for durability and stability on the halyard.

Extreme wear outdoor Arizona flags are produced using open weave 2-ply woven polyester, the longest wearing flag material available for daily, long-term display. This open weave material reduces fabric stress and outside fly-end shredding in high wind applications, allowing for up to double the wear of traditional nylon flags. Sizes offered are 3x5 ft, 4x6 ft and 5x8 ft. Textile trade names are Annin Flagmakers Tough-tex or Eder Flag Mfg. Poly-Max.

Arizona boat flags are nylon, 12”x18” size with 2 brass grommets.

Arizona indoor flags are available in 3x5 ft and 4x6 ft. nylon, and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Arizona desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Arizona stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box only, please call to order.

Arizona state classroom flags for school districts are 12”x18” lightweight poly flags hemmed on all four sides and mounted on 3/8” x 30” black wood staff with golden spear tip. Sold in quantities of 12 / box only, please call to order.

FLAG DESCRIPTION / HISTORY
Year Adopted: 1917
Arizona became a U.S. Territory in 1863, and was admittted as a U.S. State in 1912.

Arizona's state flag is divided into two halves. The top half consists of thirteen alternating red and yellow rays which represent America's thirteen original colonies. Because Arizona is a western state, the rays show a setting sun. The colors of the rays refer to red and yellow in the Spanish flags carried by Coronado when he came to Arizona in the sixteenth century. The bottom half of the flag is a solid blue field, the same color as the blue in the United States flag. A large copper colored star is superimposed in the center of the flag. This identifies Arizona as the largest producer of copper in the United States.

In 1910, Col Charles W. Harris designed a flag for the Arizona Rifle Team when they attended the National Matches at Camp Perry. Arizona was the only team in past matches without a flag. The Harris flag was adopted in 1917 by Arizona's Third Legislature and was passed into law without Governor Thomas Campbell's signature. "Governor Campbell did not officially state his reasons for taking no action on the bill, but it is generally supposed that the flag did not measure up to his ideals of what a state emblem should be." (Arizona State Library archives) January 2014


About Embassy Flag
Embassy Flag copyright