Embassy Flag, Air Force Flag

U.S. AIR FORCE FLAG
Air Force flags, Air Force lapel pins, Air Force desktop flags
Embassy Flag is a registered US Government Contractor & GSA Contract holder, and employs US military war veterans (OIF).
Order US Air Force flag items from the pull down menu below or see Bulk Pricing

Order Menu

U.S. Air Force flags are 200 denier nylon, USA made,
and finished with heading and brass grommets.

US Airforce flag

U.S. Air Force Indoor Flag
Nylon with pole hem and fringe
Indoor / Parade flagpoles & accessories

Air Force indoor flag

Air Force boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.

Air Force boat flag

Custom made regulation Air Force guidons

Embassy Flag supplies regulation U.S. Air Force unit colors and regulation unit guidons.
USAF guidon for the 49th Wing, Holloman AFB.

Air Force regulation guidon

Custom made Air Force unit colors

USAF 480th Intelligence Group

USAF AFI 34-1201 Flag and Guidon Regulation Reference:
(supercedes tinker.af.mil publication of 10/2006, 6/2009 update):
http://static.e-publishing.af.mil/production/1/af_a1/publication/afi34-1201/afi34-1201.pdf

Air Force unit flag

U.S. Air Force Desktop Flag
4"x6" soft nylon miniature flag
mounted on a 10" black staff with golden spear point

Air Force desktop flags

Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood

Desktop flag stands

U.S. Air Force flag lapel pin
Phot Etched Enamel flag lapel pins on brass
1" (24 mm)

Air Force / USA friendship flag lapel pin
(crossed flag lapel pin)

Air Force flag lapel pin

Air Force premium lapel pin
Nickel with enamel, 3/4" (19 mm) - $10.95

Air Force premium lapel pin - bronze
Brass with enamel, 3/4" (19 mm) - $10.95
(while supply lasts)

Airforce lapel pin
Airforce Premium lapel pin

Air Force Insignia premium lapel pin
Nickel with enamel
7/8"x3/4" - $10.95

Airforce Premium Lapel Pin

Outdoor Air Force flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor military flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Larger sizes are available made to order.

U.S. Air Force boat flags are nylon, 12”x18” size with 2 brass grommets.

Indoor Air Force flags are stocked in 3x5 ft nylon (4x6 ft. size is made to order) and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Air Force desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Air Force stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box.

About Embassy Flag
Embassy Flag copyright