Embassy Flag


COMMERCIAL ALUMINUM OUTRIGGER FLAGPOLES

OUTRIGGER FLAGPOLES TAPERED SHAFT

Outrigger wall mount aluminum flagpoles with tapered shafts are available from 8 ft to 20 ft in length for mounting applications where the flag will be below the roof line. Flagpoles mount at 30 and 45 degree diagonals to the wall.

Finishes
Standard finish is satin mill finish. Optional finishes include natural anodized, anodized bronze, anodized black or white powdercoat. Brackets for all anodized flagpoles are powder coated to match.

Optional Accessories
Gold leaf, copper and stainless ball ornaments are available. Cleat covers with either cylinder lock or padlock tabs are optional. An optional retainer system is available to aid in raising and lowering the flag, as well as keeping the halyard in line with the shaft and the wall angle. Kit consists of an additional retainer halyard, cleat and retainer pulley.

Aluminum Outrigger Flagpole Non-tangle Rod
Non-tangle rod

Non-tangle rods are stainless steel with stainless steel clamps available in 30", 48", 72" and 84" lengths to accept 3x5 ft through 8x12 ft flags.

A non-tangle rod installs at 90 degrees to the shaft to stiiffen the flag and keep it from wrapping around the shaft.

Flags should be ordered modified with reinforcing patches sewn into the flag to allow the flag clamp ends to properly attach. Rope and flag should be routinely inspected for wear and loose connections to avoid property damage or personal injury.

Outrigger Flagpole Brackets
Four bracket styles are available which provide an off wall angle of 30°, 45° or 60° with shaft diameters from 2" to 4 ½" and 20' in length. Commercial Outrigger Flagpoles longer than 15' will require additional bracing. Contact the factory for specifics.

The A31, A32, and the newly redesigned A34 brackets utilize a fabricated aluminum back plate with a cast or fabricated decorative aluminum cover. Standard fittings include 4 styles of mounting brackets, 5/16" halyard and nylon flag snaps, 9" cast aluminum cleat and gold anodized ball top ornament. Cleats typically install on the wall near the flagpole mounting bracket. Brackets can be installed with through the wall bolts or expansion anchors for masonry or concrete walls.

Bracket Styles
outrigger flagpole detail

External Halyard Outrigger Flagpoles
8 ft - 20 ft shafts
30 & 45 degree mountingsOutrigger flagpole dimensions

Other Outrigger Bracket Styles, 45 and 60 degree
45 degree bracket 45 degree bracket 60 degree bracket
USA & Canada Toll Free 800-798-5431

About Embassy Flag
Embassy Flag Copyright